Medium-Curing (MC) 3000
Medium-Curing (MC) 3000
Cutback Bitumen / Liquid Bitumen Cutback Bitumen is made by reducing the viscosity of and ordinary bitumen by adding mostly petroleum type solvent. Cutback Bitumen are used because their viscosity is lower than that of neat asphalt and can thus be used in low temperature applications. After a cutback is applied the solvent evaporates away and only the Bitumen is left.
A cutback bitumen is said to cure as the petroleum solvent evaporates. Cutback bitumen are typically used as prime coats and tack coats. Generally Cutback Bitumen are divided into three groups depending on their volatility of the solvent added:
Cutbacks are divided into three classification: Slow Curing (SC) SC-70 SC-250 SC-800 SC-3000, Medium Curing (MC) MC-30 MC-70 MC-250 MC-800 MC-3000, Rapid Curing (RC) RC-70 RC-250 RC-800 RC-3000.
Medium-Curing (MC) : MC cutbacks are prepared by solving bitumen in kerosene which evaporates more slowly than gasoline.
MC3000 SPECIFICATION TYPICAL PHYSICAL & PERFORMANCE PROPERTIES CHARACTERISTIC
UNIT UNIT TEST METHOD KIN.VIS@60 CST 3000-6000 ASTM D-2170 FLASH POINT C 66 MIN ASTM D-3143 WATER CONTENT %VOL 0.2 MAX ASTM D-95220 DISTILLATE TO 360 225
260
315
%VOL 15 MAX
15-75
80
ASTM D-402 RESIDUE FROM DISTILLATION TO 360 C 67 MIN ASTM D-402 TEST ON RESIDUE BITUMEN FROM DISTILLATION
PENETRATION@25 C 120-250 ASTM D-5 DUCTILITY C 100 MIN ASTM D-113 SOLUBILITY IN TRICHLOROETHYLENE %WT 99 MIN ASTM D-2042
Product Picture